Rust ESP32C3开发

Rust ESP32C3开发

系统开发逐步使用Rust语言，在嵌入式领域Rust也逐步完善，本着学习Rust和ESP32的目的，搭建了ESP32C3的环境，过程中遇到了不少问题，予以记录。

ESP-IDF开发ESP32

这一部分可跳过，是使用C开发ESP32。直接看Rust 与 ESP32C3

先使用ESP-IDF环境，跑一个Hello world

ESP-IDF安装，选择v5.1

克隆项目

git clone https://github.com/espressif/esp-idf.git

在get-started/hello-world工程中，可以编译项目，编译前连接开发板，可以在设备管理里看到comx，这里为com3

在这里插入图片描述

使用IDF-CMD命令行，进入hello-world目录，设置目标

idf.py set-target esp32c3

打开配置界面，

idf.py menuconfig

hello-world项目不进行配置，编译

idf.py build

烧录

idf.py -p PORT flash
idf.py -p COM3 flash

烧录成功

Compressed 168688 bytes to 89398...
Writing at 0x00010000... (16 %)
Writing at 0x0001a548... (33 %)
Writing at 0x00020e66... (50 %)
Writing at 0x00028352... (66 %)
Writing at 0x0002ecae... (83 %)
Writing at 0x00035da9... (100 %)
Wrote 168688 bytes (89398 compressed) at 0x00010000 in 3.1 seconds (effective 441.4 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 103...
Writing at 0x00008000... (100 %)
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 438.8 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
Done

监视输出

idf.py -p com3 monitor

Rust 与ESP32C3

参考资料

https://esp-rs.github.io/book/introduction.html

https://esp-rs.github.io/std-training/01_intro.html

https://doc.rust-lang.org/nightly/rustc/platform-support/esp-idf.html

https://esp-rs.github.io/book/overview/index.html

Rust工具链

安装

rustup toolchain install nightly-2023-02-28 --component rust-src

espressif 工具链

包含：

  • cargo-espflash
  • espflash
  • ldproxy

安装

cargo install cargo-espflash espflash ldproxy

克隆仓库

克隆代码，并进入

git clone "https://github.com/esp-rs/std-training.git"
cd std-training

hello，board

连接开发板，

进入hardware-check目录

cd intro/hardware-check

配置你的wifi名称与密码，cfg.toml

[hardware-check]
wifi_ssid = "111111"
wifi_psk = "123451111"

编译

cargo build

报错

error: failed to run custom build command for `esp-idf-sys v0.33.0`

 CMake Error at C:/Users/Rao/.espressif/esp-idf/v4.4.4/tools/cmake/component.cmake:300 (message):
    Include directory
    'C:/Users/Rao/.espressif/esp-idf/v4.4.4/components/mbedtls/mbedtls/include'
    is not a directory.
  Call Stack (most recent call first):
    C:/Users/Rao/.espressif/esp-idf/v4.4.4/tools/cmake/component.cmake:473 (__component_add_include_dirs)
    C:/Users/Rao/.espressif/esp-idf/v4.4.4/components/mbedtls/CMakeLists.txt:18 (idf_component_register)

原因是

'C:/Users/Rao/.espressif/esp-idf/v4.4.4/components/mbedtls/mbedtls/include'
    is not a directory.

说明这个目录位于mbedtls的submodule中, 可能没有被checkout出来

解决方法，进入C:/Users/Rao/.espressif/esp-idf/v4.4.4/components/mbedtls/

git submodule update --init --recursive

cargo run

报错

 D:/Workspace/Program/ESP32/std-training/intro/hardware-check/target/riscv32imc-esp-espidf/debug/build/esp-idf-sys-281d3f81b0a0f0ca/out/build/esp-idf/mbedtls/mbedtls/library/CMakeFiles/mbedcrypto.dir/./

    has 201 characters.  The maximum full path to an object file is 250
    characters (see CMAKE_OBJECT_PATH_MAX).  Object file

      d5fa956509b7db88e8eaa02d1680138d/esp_rsa_sign_alt.c.obj

    cannot be safely placed under this directory.  The build may not work
    correctly.

目录太长了,回到std-training目录，将项目映射到r:

 subst r: std-training
 cd r:

进入hardware-check重新编译

 cd intor/hardware-check
 cargo run

成功

I (9229) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 0, mt_pti: 25000, mt_time: 10000
I (9239) wifi: Waiting for DHCP lease...
I (9249) wifi:<ba-add>idx:0 (ifx:0, 62:1e:12:f4:12:61), tid:0, ssn:0, winSize:64
I (9319) wifi:AP's beacon interval = 102400 us, DTIM period = 2
I (10239) esp_netif_handlers: sta ip: 192.168.83.104, mask: 255.255.255.0, gw: 192.168.83.127
I (10239) wifi: Wifi DHCP info: IpInfo { ip: 192.168.83.104, subnet: Subnet { gateway: 192.168.83.127, mask: Mask(24) }, dns: Some(192.168.83.127), secondary_dns: Some(0.0.0.0) }
I (11249) hardware_check: Hello, world!
I (13249) hardware_check: Hello, world!

查看板子运行状态

espflash monitor

创建新项目

为了避免长路径问题，将一个空间映射为短路径

subst z: esp32
cd z:

由cargo-generate配置新项目

安装

cargo install cargo-generate

生成

PS z:> cargo generate https://github.com/esp-rs/esp-idf-template cargo
⚠️   Favorite `https://github.com/esp-rs/esp-idf-template` not found in config, using it as a git repository: https://github.com/esp-rs/esp-idf-template
?   Project Name: hello_world
⚠️   Renaming project called `hello_world` to `hello-world`...
?   Destination: z:hello-world ...
?   project-name: hello-world ...
?   Generating template ...
✔ ?   Which MCU to target? · esp32c3
✔ ?   Configure advanced template options? · false
?   Moving generated files into: `z:hello-world`...
Initializing a fresh Git repository
✨   Done! New project created z:hello-world

用vscode打开项目

code .

加一个死循环

fn main() {
    // It is necessary to call this function once. Otherwise some patches to the runtime
    // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
    esp_idf_sys::link_patches();
    // Bind the log crate to the ESP Logging facilities
    esp_idf_svc::log::EspLogger::initialize_default();

    info!("Hello, world!");

    loop {
        info!("loop ...!");
        std::thread::sleep(std::time::Duration::from_secs(1))
    }
}

编译

cargo run

一般时间会很长

运行起来

I (356) cpu_start: Starting scheduler.
I (362) hello_world: Hello, world!
I (362) hello_world: loop ...!
I (1362) hello_world: loop ...!
I (2362) hello_world: loop ...!
I (3362) hello_world: loop ...!

http客户端

进入espressif-trainnings/intro中的http-client项目，

修改wifi配置，

编译

cargo run --example http_client

完全可以自己写一个服务器，提供http服务，例如go

package main

import "github.com/gin-gonic/gin"

func main() {
	engine := gin.Default()
	engine.GET("/", func(context *gin.Context) {
		context.JSON(200, gin.H{
			"message": "Hello World",
		})
	})
	engine.Run("")
}

该服务端提供了get请求，默认根目录，响应json数据。

在http-client/examples/http_client.rs中，

 get("http://192.168.83.79/")?;

注意需要在一个局域网内，并且知道主机的ip地址。

运行

cargo run --example http_client

http服务器

提供get服务

编写wifi配置

cd .http-server

cargo run --example http_server

我的开发板获取温度有一些异常，注释掉获取温度的代码。

http://192.168.83.104/temperature

MQTT

搭建mqtt服务器，

wsl + ubuntu+docker

https://www.emqx.io/docs/zh/v5.1/deploy/install-docker.html

拉取镜像

docker pull emqx/emqx:5.1.0

启动容器

docker run -d --name emqx -p 1883:1883 -p 8083:8083 -p 8084:8084 -p 8883:8883 -p 18083:18083 emqx/emqx:5.1.0

http://wsl-ubuntu 地址 :18083/

默认用户名及密码

admin
public

通过MQTTfx测试mqtt服务器是否正常，

https://softblade.de/en/download-2/

在这里插入图片描述

创建连接

在这里插入图片描述

发送消息，需要往某个主题发送

在这里插入图片描述

所有订阅了hello主题的客户端，都能收到消息。

在这里插入图片描述

cargo run --example solution_publ_rcv

后续局域网还有点问题，后面再做，

ssd1306

https://juejin.cn/post/7096077841023893511

初始化一个项目

cargo generate --git https://github.com/esp-rs/esp-idf-template cargo

PS R:> cargo generate --git https://github.com/esp-rs/esp-idf-template cargo
 Project Name: ssd1306_esp32c3
 Renaming project called `ssd1306_esp32c3` to `ssd1306-esp32c3`...
 Destination: R:ssd1306-esp32c3 ...
 project-name: ssd1306-esp32c3 ...
 Generating template ...
✔  Which MCU to target? · esp32c3
✔  Configure advanced template options? · false
 Moving generated files into: `R:ssd1306-esp32c3`...
Initializing a fresh Git repository
 Done! New project created R:ssd1306-esp32c3

初始化外设

use esp_idf_sys as _; // If using the `binstart` feature of `esp-idf-sys`, always keep this module imported
use log::*;
use esp_idf_hal::{
    delay::FreeRtos,
    i2c::{I2cConfig, I2cDriver},
    peripherals::Peripherals,
    prelude::*,
};

fn main() {
    // It is necessary to call this function once. Otherwise some patches to the runtime
    // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
    esp_idf_sys::link_patches();
    // Bind the log crate to the ESP Logging facilities
    esp_idf_svc::log::EspLogger::initialize_default();
    
    let peripherals = Peripherals::take().unwrap();

    let sda = peripherals.pins.gpio10;
    let scl = peripherals.pins.gpio8;

    let config = I2cConfig::new().baudrate(400.kHz().into());
    let i2c = I2cDriver::new(peripherals.i2c0, sda, scl, &config).unwrap();
    

    info!("Hello, world!");
}

还不太行，留坑
esp_idf_sys::link_patches();
// Bind the log crate to the ESP Logging facilities
esp_idf_svc::log::EspLogger::initialize_default();

let peripherals = Peripherals::take().unwrap();

let sda = peripherals.pins.gpio10;
let scl = peripherals.pins.gpio8;

let config = I2cConfig::new().baudrate(400.kHz().into());
let i2c = I2cDriver::new(peripherals.i2c0, sda, scl, &config).unwrap();


info!("Hello, world!");

}


还不太行，留坑